15.6 INCH ACF attaching machine ACF attaching machine Single side multi-segment OL-A00156

15.6 INCH ACF attaching machine Single side multi-segment OL-A00156

  • 型号:
  • 型号: OL-A00156

15.6 INCH ACF attaching machine ACF attaching machine Single side multi-segment OL-A00156


Equipment use

1.1 This equipment is a multi-segment ACF attaching machine, which can attach conductive film (ACF) on PCB, LCD, LED, etc. The picking and placing of PCB, LCD, LED and other products is done manually, and attaching heat The pressure and ACF length control is automatically completed by the equipment. 1. 2 It can be attached in 1-10 positions on one side.

Technical Parameters

Equipment production capacity: about 4.5sec, calculated according to a single payment position: about 800pcs/hour

Product qualification rate: ≥98% (defective materials are not counted)


Process flow:

1) Manually place the Panel on the Panel workbench

2) Press the vacuum button of the Panel workbench, and the Panel is adsorbed on the Panel workbench

3) Press the start button with both hands, the Panel workbench moves forward to the pressing position, and the hot pressing head drops

4) The hot press head heats the ACF on the Panel. After the set hot press time is up, the hot press head rises, the peeling device peels off the ACF, and the platform moves 2nd, 3rd...attach (according to the set attachment position)

5) Finish attaching

6) The Panel workbench is moved back to the feeding position, and the ACF is rolled over the set length, and the cutting is completed. 7) Manually remove the hot-pressed product 8) The attachment of the second product repeats the above 1)~6) Steps

Pressing accuracy: X: ±0.2, Y: ±0.2mm

Number of fit segments: 10 segments can be pasted.


Features

1. The equipment is controlled by PLC, and the length of the tape is controlled by a high-precision stepping motor;

2. The equipment adopts semi-shearing (only cuts the ACF but not the centrifugal membrane), and the shearing depth and position can be adjusted freely;

4. The number of sides to be attached to a product, the number of sections on each side, and the attachment position of each section can be freely set according to requirements;

5. Using universal template design, product switching is easier;

6. The longest ACF attached to each section can be as long as 90mm;



15.6寸单边多段ACF 贴附机

设备简述

1.1 本设备为多段 ACF 贴附机,可以在在 PCB,LCD,LED 等上贴附导电膜(ACF)的设备,PCB, LCD,LED 等产品的的取放是手工完成, 贴附热压及 ACF 长度控制是由设备自动完成。 1. 2 可实现单边 1-10 个位置贴附。

设备用途

1.1 本设备为多段 ACF 贴附机,可以在在 PCB,LCD,LED 等上贴附导电膜(ACF)的设备,PCB, LCD,LED 等产品的的取放是手工完成, 贴附热压及 ACF 长度控制是由设备自动完成。 1. 2 可实现单边 1-10 个位置贴附。

技术参数

    设备产能:约 4.5sec,按单个贴付位置计 算产量:约 800pcs/小时

    产品合格率: ≥98% (来料不良不计其内)

    工艺流程:

    1) 手动将Panel 放在Panel 工作台上

    2) 按下 Panel 工作台真空按钮,Panel 吸附在 Panel 工作台上

    3) 双手按下启动按钮,Panel 工作台 前行至压合位置,热压头下降

    4) 热压头将 ACF 热压在 Panel 上,设 定热压时间到后热压头上升,剥离 装置将 ACF 剥离,平台移动第 2, 第 3…贴附(根据设置的贴附位置)

    5) 完成贴附

    6Panel 工作台后退至上料位置,同 时 ACF 卷过设定长度,并剪切完 成. 7) 手动取下热压好的产品 8) 第二个产品的贴附重复上述1~6) 的步骤  

    压合精度 :X:±0.2, Y:±0.2mm

    贴合段数 :可贴 10 .

设备特点

1、本设备由PLC控制动作,高精度步进电机控制走带长度;

2、设备采用半剪切(只切断ACF不切断离心膜),剪切深度和位置可以自由调节;

4、一个产品要贴附的边数、每一边有几段及每段贴附位置可根据需求自由设定;

5、采用通用模板设计,产品切换更简单;

6、每段贴附最长ACF可以长达90mm长;


工作视频

Homepage
Products
News
Contact
Videos