Single station up and down alignment pulse bonding machine OL-FDP005

Equipment use

This equipment is a single-station up and down alignment manual hot press bonding machine. It is a device for alignment and pre-pressing of FPC, COF or zebra paper on the Panel that has been attached to the conductive film (ACF). , Alignment is done manually, and bonding is done automatically by equipment. It is suitable for the hot pressing of 1"～7" glass screen or flexible screen products.

Technical Parameters

Applicable LCD size:2~7 inch STN/CSTN/TFT-LCD (the platform can be expanded to 9 inches);

Capacity:About 180 tablets/hour;

Panel thickness:0.3~1.1mm;

FPC/COF compression range:6~80mm;

Mounting accuracy:X±0.005mm, Y±0.005mm;

Indenter specifications:50*0.8mm, can be changed according to customer requirements;

Flatness of hot pressing head:±5μm;

heating method:Pulse heating

temperature range:RT-400℃;

Temperature accuracy:±3℃;

Product fixing method:Vacuum adsorption;

Air consumption:0.1 cubic meter per minute;

working pressure:0.4~0.6Mpa;

power supply:220V, 50HZ, 1500W;

Total weight:250Kg;

Dimensions:L600*W840*H1310(720);

Features

1. The high-precision imaging unit is used to increase the number of magnifications to nearly 300 times;

2. Add manual room temperature pre-compression function to solve the problem of COF bending;

3. The upper and lower light sources are used for the alignment at the same time to make the alignment process more clear.

单工位上下脉冲邦定机

设备简述

本设备为单工位上下对位手动热压机，是在已贴附好导电膜（ACF）的 Panel 上为连接 FPC、COF或斑马纸而进行对位及预压的设备，Panel 的取放、对位是手工完成，Bonding 是设备自动完成。适合于 1"～7"的玻璃屏或柔性屏产品的热压。

设备用途

技术参数

未标题-1.jpg

适用LCD尺寸：	为2~7寸之STN/CSTN/TFT-LCD(平台可扩至9寸);
产能：	约180片／小时;
Panel厚度：	0.3~1.1mm;
FPC/COF压合范围：	6~80mm;
实装精度:	X±0.005mm,Y±0.005mm;
压头规格：	50*0.8mm,可根据客户要求改变;
热压头平整度 :	±5μm;
加热方式：	脉冲加热
温度范围：	RT-400℃;
温度精度：	±3℃;
产品固定方式：	真空吸附;
耗气量：	0.1立方/分钟;
工作气压：	0.4~0.6Mpa;
电源：	220V，50HZ，1500W;
总重：	250Kg;
外形尺寸：	L600W840H1310(720);

应用案例

设备特点

1、采用高精度的成像单元，将放大位数提高到近300倍；
2、增加手动常温预压功能，解决COF弯曲问题；
3、采用上下光源同时用于对位让对位过程清晰度更高。